Getting Started with Raspberry Pi and LabVIEW

Getting Started with Raspberry Pi and LabVIEW

You will learn how to connect Raspberry Pi and LabVIEW, the software and hardware part and why it’s useful

What you’ll learn

  • Link LabVIEW with Raspberry Pi
  • Download and Install the Required Software
  • Fully Control Your Raspberry Pi using LabVIEW
  • Make your own LabVIEW Interface to Interact with Raspberry Pi
  • Connect to Raspberry Pi Remotely without a display
  • Install NI-VISA Library
  • Install LabVIEW MakerHub LINX
  • Setting Up the RPI
  • Installing LabVIEW on the RPI
  • Run an Example
  • Adding New VIs

Requirements

  • Basic experience in Electronics
  • A Will to apply, not just watch
  • Basic experience in LabVIEW
  • Basic experience in Raspberry Pi

Description

>>> In this Course, you will learn how to connect Raspberry Pi and LabVIEW, the software and hardware part and why it’s useful <<<

Welcome to this course.

This Course will show you in a step by step manner how to connect the Raspberry Pi 2 Model B (RPI 2) or Raspberry Pi 3 Model B or Raspberry Pi 4 Model B (RPI 4) to LabVIEW using LabVIEW LINX. LINX is used to interact with common embedded platforms like Arduino, Raspberry Pi, Beaglebone Black, and others.

LabVIEW is basically a graphical programming syntax that makes it simple to visualize, create, and code engineering systems.

  • With the Raspberry Pi, you can actually deploy your LabVIEW VIs to the board and run with a computer to visualize your data or run headlessly.
  • You can also set your VI to run on startup so that each time you power on the RPI it will run your VI without a computer!

You will know what is the actual hardware and software configurations needs to be done to make this interfacing work smoothly.

After this course, you will be able to make your own interfacing and the choice is yours to use in any application that comes to mind since all connections and configurations are explained in detail.

What you’ll learn

  • Link LabVIEW with Raspberry Pi
  • Download and Install the Required Software
  • Fully Control Your Raspberry Pi using LabVIEW
  • Make your own LabVIEW Interface to Interact with Raspberry Pi
  • Connect to Raspberry Pi Remotely without a display
  • Install NI-VISA Library
  • Install LabVIEW MakerHub LINX
  • Setting Up the RPI
  • Installing LabVIEW on the RPI
  • Run an Example
  • Adding New VIs
  • More Practical Examples and Resources

Bonus 1: LabVIEW Step by Step

Bonus 2: Raspberry Pi Step By Step for Beginners

Who this course is for:

  • Electronics Geeks
  • LabVIEW Geeks
  • Raspberry Pi Geeks
  • Anyone Interested in Learning New Things about LabVIEW
  • Anyone Interested in Learning New Things about Raspberry Pi
  • Anyone Interested in Learning How to Control Raspberry Pi using LabVIEW

Course content

10 sections • 65 lectures • 4h 41m total length
  • Introduction & Getting Started
  • Download and Install Required Software
  • Raspberry Pi Hardware and Software Setup
  • Connect to Raspberry Pi
  • LabVIEW LINX Examples
  • Raspberry Pi Led Control Practical Example
  • Digital Read and Write Example
  • Resources
  • Bonus 1: LabVIEW Step by Step
  • Bonus 2: Raspberry Pi Step By Step Beginner Guide
Created by: Educational Engineering Team, Team of skilled Engineers Sharing Knowledge with the World
Last updated 2/2021
English
English [Auto]
Direct Download Available

(2 ratings)
46 students
https://www.udemy.com/course/raspberry-pi-labview-getting-started-link-raspberry-pi-labview/

Download link



Friendly Websites






Related Posts

Add a Comment

Your email address will not be published. Required fields are marked *